Two holes drilled on close C-C spacing with an ER8 drilling head by AutoDrill.The AutoDrill strokes down to the work, drills a bit, then retracts to clear the chips and then continues down again.This continues until the hole drilling process is compl...
AutoDrill multiple spindle heads and pneumatic drills making multiple holes in round pipe.? These heads can be used on well pipes, helical pipe cores, or any round pipe that meets the necessary criteria for the automatic plug ejection system.? ...Tha...
AutoDrill multiple spindle head unit using Hougen cutter tooling to drill round hole in the side of a thick walled round tube. Positive plug ejection system in use.
Gang Drill Machine by AutoDrill. The customer wanted to drill three holes at a time down the length of an extruded part. They built a linear control module to move the AutoDrill 2000 series unit and multiple spindle head so that with a single button ...
A basic AutoDrill 2100 series is set up on a Kentucky Gauge system to drill small holes in aluminum bar. It is a very simple set-up, but illustrates how a single or multiple spindle drilling unit can be automated to drill the length of a material aut...
Big ginger getting 0wn3d while sleeping "shitty camera phone"
"A large material pusher company recently added to its line of products the option to drill holes in the vertical or horizontal direction. They chose the highly reliable and flexible AutoDrill line of products. By choosing to move the AutoDrill unit...
"Kentucky gauge recently added to its line of products the option to drill holes in the vertical or horizontal direction. They chose the highly reliable and flexible AutoDrill line of products. They can now offer small hole, large hole, annular cut...
Press Release-S.C.A.N. Music Records-Amsterdam May 23,2013 Making the video/trailer S.C.A.N. Music Records releases the making the video to Sixman up and coming video and new single Wire Taps a song that tells the story of government and police ha...
AutoDrill's first test with a 5000 series unit and an annular cutter. We regularly run these cutters on our smaller 2000 series units (even with multiple spindle heads) but this is our first official test on the larger 5000 series unit. DETAILS: The ...
AutoDrill recently sold a number of mach...
AutoDrill dual spindle head unit using H...
Two holes drilled on close C-C spacing w...
*** THIS IS A SAMPLE VIDEO AND THE PROCE...
A quick overview of the AutoDrill produc...
Automatic drilling and tapping station
Slow cycle shown. Example only. Not ru...
AutoDrill multiple spindle heads and pne...
